Health & Safety: The Easy StartTM Anti-Colic Bottles meet the requirements of European Standard EN 14350.

Safety Warning: 1. These instructions are important for safety. The MAM Move Wearable Breast Pump contains a motor, an electric rechargeable battery and parts that must be kept clean. Damage or improper handling of the breast pump can cause infections, injuries and fire. The instructions for use are part of the breast pump and contain full information on how to avoid these risks. Read and observe the instructions for use in their entirety. Keep the instructions for use within easy reach. Always use the breast pump in accordance with its intended use. 2. The MAM Move Wearable Breast Pump is exclusively intended for expressing milk from the breast of lactating women. MAM Move is a single-user product, use by more than one person may present a health risk. This breast pump is exclusively intended for personal use. DO NOT USE the pump while driving a vehicle. When transporting and/or using the pump in an aircraft: Check regulations regarding the transport of devices with lithium-ion batteries in advance. Also, make sure to be aware of the airline regulations for the use of portable electronic devices. 3. Keep the MAM Move Wearable Breast Pump out of reach of children. Children cannot assess the risks and could injure themselves. Parts of the packaging and small components can be swallowed. Keep all parts of the breast pump and packaging out of the reach of children. Remove and safely dispose of all packaging from the breast pump. Children can swallow parts. NEVER allow children to play with the breast pump. Clean the breast pump yourself. DO NOT let children clean or maintain the breast pump. Secure the charging cable and make sure that it cannot be pulled inadvertently, causing the appliance to fall onto the floor. 4. People with limited physical, sensory, and mental abilities as well as people with minimal experience or knowledge cannot assess the risks. Such people must always be supervised. Show such people how to use the device safely. 5. Before and after use check the breast pump before each use for damage. Only use it if the appliance and charging cable are intact. If the breast pump is damaged, STOP using the breast pump. At the first sign of any damage, the component in question must be either disposed of or repaired. When charging with the USB-C charging cable, make sure that the breast pump does not fall over. 6. DO NOT use the breast pump in the bathtub or shower. DO NOT immerse the electric pump unit in water. The MAM breast pump could otherwise cause a fire and would have to be discarded. DO NOT clean the electric pump unit in the dishwasher. If the electric pump unit accidentally falls into water, do not reach for it. Unplug immediately. 7. Before each use clean and if necessary - sterilise all parts that come into contact with the breast and breast milk as explained in section 3 (Cleaning the appliance and set components). When cleaning the pump unit, unplug the adapter. 8. Do not store wet or damp parts, as mold may develop. Only store the MAM breast pump at temperatures between 0°C – 40°C. Keep the breast pump out of direct sunlight. Keep the breast pump away from heat sources Never place the device’s electric pumping unit in the microwave. Never place the device’s electric pumping unit in the fridge or freezer. 9. Use of accessories and cables other than those specified or provided by the manufacturer of this equipment could result in improper operation. It is recommended to use a certified 5V 2A USB power adapter compatible with your regional power sources to charge the device. 10. A damaged MAM breast pump is a safety hazard. NEVER open the motor unit of the MAM breast pump. The appliance may only be opened by an authorized service center. Opening by any unauthorized person will automatically make the warranty invalid. Repairs may only be performed by specialist personnel. Improper repairs can create serious safety hazards for users. If the MAM breast pump is damaged or is not working, please call the MAM hotline. 11. Charge the battery at least once a month. To maximize the working life of the device, charging time should not exceed 6 hours. DO NOT remove the battery yourself. Inbuilt lithium battery is nonremovable. As the battery needs to be collected, please ask for help to remove the battery from the appliance at the recycling location. 12. Safely disposing of the MAM breast pump In order to protect the environment, you are legally required to dispose of the device safely. The symbol for this device means: Dispose of the electrical equipment at a disposal point. DO NOT dispose of with unsorted municipal waste. Sellers must take back the electrical equipment free of charge. 13. It’s recommended to consult with a licensed healthcare professional before using the MAM Move Wearable Breast Pump - if you have an active implanted device that would be affected by a magnetic field (e.g. pacemaker, implantable cardioverter defibrillator). Using a breast pump should not cause pain. Do not try to express with an intensity setting that is too high or uncomfortable. If excessive discomfort or pain is felt during pumping, stop pumping, break the Funnel around your nipple and discontinue the session. Contact your healthcare professional if you express minimal or no milk, or if expression is painful.

Composition: Silicone 36.47g, plastic PP circular 64.55g, plastic PP 9g, electronic 294g, plastic polyester 25.4g, plastic POM 1g

Care & Maintenance: Before using your MAM Move Wearable Breast Pump for the first time and after each use, all parts that come into contact with the breast and breast milk must be separated, cleaned and sterilised. The electric pump motor unit must NOT be washed with water. Only drinking-quality water must be used for cleaning. Completely air dry before reassembly and next use. Partially wet components may affect the operation of the breast pump. Take care not to damage parts of the pump set during cleaning. 3.1 Washable components Cleaning washable components that come into contact with milk prevents the build-up of dry milk residue, which can cause the growth of bacteria that may be harmful to you and your baby. 3.2. Before cleaning, all parts of the pump must be separated. Begin by rinsing all washable components in cold, clear water. Then wash all parts in warm soapy water, with a damp cloth or sponge and rinse thoroughly with cold water afterwards. Do not use any abrasive cleaning agents such as antibacterial solutions, as these could damage the appliance’s surface. Leave the separated parts to air dry. 3.3. Cleaning in the dishwasher To clean the breast pump components in the dishwasher, place the separated washable parts on the top rack of the dishwasher or in the cutlery section. When washing the pump parts in the dishwasher, the components may become discolored by food pigments – this does not affect their function. We recommend to carefully clean the diaphragm (3), valve (4), and bottle lid (10) by hand to prevent damages and to ensure that those small components do not get lost. 3.4. Cleaning the electric pump unit Do NOT wash or sterilise the electric pump motor unit, this component does not come into contact with your breast milk. The pump motor contains electronics that should be kept dry. To clean the electric pump unit, unplug the appliance, switch it off and wipe it with a clean, damp cloth. Never place it in a dishwasher for cleaning. The appliance must not be immersed in water. 3.5. Sterilising Before using the pump for the first time and after each use, it is recommended, to sterilise all components that come into contact with breast milk. The parts shown in Fig. 1 (Washable components) are suitable for the following sterilisation methods: The separated pump parts can be sterilised in boiling water (maximum 5 minutes), in an electric or microwave steam steriliser (maximum 9 minutes) as well as in cold sterilising liquid. Do not leave any part standing in sterilising solutions longer than recommended. This could negatively affect the product function and may weaken the parts. The self-sterilising function of the Milk Collector is proven to be effective for killing common household germs and bacteria. This practical and time- and energy saving function can be achieved in a few simple steps. For detailed explanation please scan the QR code at the end of the leaflet, this will take you to an instruction video on our website. After sterilising store the pump set in a clean bag / container until next use. Please note: never sterilise the assembled pump – always separate the parts. Important: allow all parts of the pump to fully cool and dry before use. 4. When the battery is low in working process, the left side indicator light will flash. When charging, the indicator will light up and the pump will not turn on. Use the USB-C charging cable provided to connect the pump motor to a USB power source (5V, 2A), such as your phone plug. When fully charged, the five indicators all light up. It takes approximately 90 minutes to fully charge the battery, which provides approximately 2 hours usage time on standard settings. Do not use the pump whilst charging. TIP: If low battery is indicated after your pumping session, charge immediately. The remaining battery power can be checked by pressing the pressing the and buttons simultaneously for 2 seconds and counting how many indicators light up (the pump has to be switched off). Each indicator represents about 20% remaining power.

Delivery Options

Standard Delivery

The delivery options available in checkout may vary based on your items availability and your location.

*Delivery services only available Tuesday to Friday.